Product list
Hot News
Centrifugal fan debugging
Centrifugal fan installation
In the design of centrifugal fans to consider which aspects
Centrifugal fans to develop, reduce power consumption is the key
How to test the quality of centrifugal fans
Centrifugal fan performance characteristics make it a certain degree of intelligence
Fan maintenance personnel precautions
In order to avoid the occurrence of human failure due to improper maintenance, to prevent the fan and the electrical aspects of the natural failure and accidents, so as to give full play to the performance of equipment to extend the service life of the equipment must be strengthened fan maintenance.
Fan maintenance personnel must pay attention to the following points:
1, only in the fan equipment under normal circumstances can be run.
2, such as fan equipment in the maintenance after the start, you need to pay attention to whether the normal parts of the fan.
3, regularly remove the fan and gas pipeline inside the dust, dirt and water and other impurities, and to prevent corrosion.
4, the repair of the fan equipment, not allowed in the operation.
The precautions required for normal operation of the fan are as follows:
1, such as the flow is too large, do not meet the requirements, or a short time need a smaller flow, you can use the throttle device to adjust.
2, the sensitivity of the thermometer and oil standard regularly checked, and should control the bearing tank oil level within the allowable range.
3, in the fan of the car, parking or operation process, if found abnormal phenomenon, should immediately check.
4, the inspection found a small fault, should promptly identify the reasons, try to eliminate or deal with, such as small failure can not be eliminated, or found a big fault, should immediately check.
5, in addition to each repair, should be replaced with lubricating oil, but also regularly replace the oil.
6, the E-type drive bearing should be regularly (quarterly) inspection, cleaning and additional lubricants to prevent bearing burned.
Fan maintenance personnel must pay attention to the following points:
1, only in the fan equipment under normal circumstances can be run.
2, such as fan equipment in the maintenance after the start, you need to pay attention to whether the normal parts of the fan.
3, regularly remove the fan and gas pipeline inside the dust, dirt and water and other impurities, and to prevent corrosion.
4, the repair of the fan equipment, not allowed in the operation.
The precautions required for normal operation of the fan are as follows:
1, such as the flow is too large, do not meet the requirements, or a short time need a smaller flow, you can use the throttle device to adjust.
2, the sensitivity of the thermometer and oil standard regularly checked, and should control the bearing tank oil level within the allowable range.
3, in the fan of the car, parking or operation process, if found abnormal phenomenon, should immediately check.
4, the inspection found a small fault, should promptly identify the reasons, try to eliminate or deal with, such as small failure can not be eliminated, or found a big fault, should immediately check.
5, in addition to each repair, should be replaced with lubricating oil, but also regularly replace the oil.
6, the E-type drive bearing should be regularly (quarterly) inspection, cleaning and additional lubricants to prevent bearing burned.
Prev£ºCentrifugal fan working principle and function
Next£ºNone
related articles
- Centrifugal fan debugging
- Centrifugal fan installation
- In the design of centrifugal fans to consider which aspects
- Centrifugal fans to develop, reduce power consumption is the key
- How to test the quality of centrifugal fans
- Centrifugal fan performance characteristics make it a certain degree of intelligence
- The proper installation of the centrifugal fan is an important indicator of its normal operation
- Centrifugal fans in the process of downtime must pay attention to the program can be safe and worry-free
- The role of centrifugal fans in cooling towers